Plumbing Concepts, Inc. Service & Repair division is among the elite in the industry. Utilizing cutting edge technology, like electronic leak detection, video inspection, drain servicing, and radio dispatched vehicles equipped with GPS locator systems, assures you that Plumbing Concepts will be there when you need them with the equipment and know how to solve your problem.

Plumbing Concepts maintains a database on every home it builds. If you are not sure what type of whirlpool tub or kitchen faucet you have, no need to worry, we do. This enables us to have the correct parts on the truck before it arrives at your home, ensuring that your problem will be fixed quickly and professionally.

The following is a list of recommended homeowner maintenance items to keep the plumbing in your home running in top shape.

As needed items

~ To keep faucets and tub/shower valves stain free – wipe with a soft, dry cloth and a non-abrasive cleaner
~ Fix dripping faucets as soon as you notice them dripping
~ Fix running toilets as soon as you notice them running
~ Unclog slow-running drains as soon as you notice them

Monthly

~ Check auto washer hoses for leaks. Use only new, preferably braided hoses when connecting your auto washer for the first time
~ Check dryer vent to be sure it is not clogged with lint
~ Look under refrigerator to make sure icemaker connection is not leaking
~ Run whirlpool systems, if you have one, on your master tub
~ Turn on every tub or shower valve and cycle it from hot to cold a couple of times to keep the pressure balancing spools from freezing up
~ Run water at seldom used fixtures to “P” traps full of water
~ Inspect any pullout hoses on kitchen faucets for wear or leakage where the hose and the spray nozzle meet. This connection will work itself loose from use if not retightened
~ Inspect exposed plumbing areas such as under bathroom lavatories or kitchen sinks and below and around toilets, etc for dampness or leaks
~ Check for loose or rocking toilets and inspect the bases for possible leaks
~ Clean faucet aerators if the water flow appears restricted or the stream is irregular. Soak in vinegar to keep them lime free.
~ Check showerheads for irregular spray. Clean debris or lime as necessary
~ Check all exterior hose bibs and auto washer bibs for leaks or drips

Every 6 months

~ Open and close main water shut off valve
~ Check the condensate drain lines from your forced air unit to be sure they are not clogged and draining freely
~ Inspect water heater flex connectors for leaks
~ Check timer on re-circulating hot water pumps, if applicable. Be sure these pumps are on a timer and are NOT running 24 hours a day
~ Check temperature setting on water heater. It should not be on the highest setting or over 130. It should be in the NORMAL range of temperature settings
~ Check your water pressure. It should be 65 PSI or less
~ Check the grout lines where the tile meets the bathtub. They should not be cracked. Re-grout as necessary
~ Check the caulking at the tub/shower enclosures, around flanges on tub/shower valves and spouts, shower arms and caulking around lavatories and sinks. Re-caulk as necessary
~ Check all angle stops by turning them on and off, this will insure they do not freeze up or flatten gaskets
~ Angle stop valves should only be hand tight

Yearly

~ If your house waste system has a backwater valve, inspect and be sure it is clean and clear
~ If your house balcony or deck drains, pour water down them to be sure they are free flowing and not clogged with leaves or debris
~ Clean the screen on water pressure regulators
~ Check all gas appliances for possible gas leaks
~ Mechanically snake main sewer lines to ensure system remains clear and clean
~ Drain and flush water heater tank to keep clean and free from calcium build up or debris

The following information will explain the plumbing components and warranty coverage for the plumbing systems and fixtures in your new house.

Service Department:
Office: (951) 520-8590
Fax: (951) 520-1930

When requesting service please be ready to give your name, street address, phone number, close of escrow date, builder name and tract name. Our service department hours are 8:00 a.m. to 5:00 p.m. Monday through Thursday and 8:00 a.m. to 4:00 p.m. on Friday. If you need emergency service after hours or on weekends, call the above number. Only true emergencies will be repaired after normal business hours. If the call is not an emergency instructions will be given to isolate the problem until the next business day.
Keep in mind that every product with moving parts requires maintenance occasionally. The primary enemy of working plumbing parts is dirt or other foreign material in the water system. We cannot control the quality or purity of your water, nor can the builder of your home; but with regular maintenance these products will give you years of reliable service.

After the one year warranty period, we can continue to service your home at our hourly rate. Because we built your home we know what products were used in your house and are most qualified to perform their maintenance.
Please see below for the warranty coverage:

Plumbing Concepts, Inc
2445 Railroad St.
Corona, CA 92880
Office | (951) 520-8590

Service & Repair

The following information will explain the plumbing components and warranty coverage for the plumbing systems and fixtures in your new house.

Service Department:
Office: (951) 520-8590
Fax: (951) 520-1930

Emergencies

Call our Customer Service number (951-520-8590) and follow the voice prompts for emergency service if calling after hours. You will receive a return call and the plumber will determine if it is an actual emergency. If the call is not a true emergency, instructions will be given over the phone that will isolate the problem until the next business day.
Examples of actual emergencies are: water leaking from the ceiling or light fixtures or any other unknown source, gas leaks or mainline sewer stoppages (multiple first floor fixtures are clogged or backed-up with water).

In the event of a water leak in a wall or ceiling turn off the main shut-off valve which is located where the water main enters your house or garage. To shut-off a ball valve turn the lever until it is at a 90 degree angle with the pipe.

Individual fixtures (such as toilets, kitchen sinks, lavatories, etc.) have separate water shut-off valves for hot and cold below them. If you notice water around the base of your toilet or in the cabinets below your sinks turn the handle on the shut off valve clockwise to shut off the flow of water.

Piping System

All the water, waste and gas systems are warranted to be free of defects for ONE YEAR after your CLOSE OF ESCROW date (COE). Damaged or normal homeowner maintenance items are excluded from this warranty.

The Water System

The water system in your house is made of code approved materials, such as copper or plastic piping.

If you intend to cut into the piping system for sprinkling systems or if you shut off your main water valve, either at the curb or at the house, be sure you unplug your re-circulating hot water pump if you have one. Failure to do so will burn out your pump, and it will not be covered by warranty.

Water pressure regulators are commonly installed on your house. They will be located just above the main water shut off valve at your house. DO NOT ADJUST YOUR WATER PRESSURE REGULATOR TO OVER 70 PSI. Dirt or pipe shavings could cause a reduction of water flow through the regulator. The strainer on the regulator needs to be cleaned yearly.

It is recommended that you call a plumbing professional before adjusting the water pressure regulator.

Your hose bibbs are soldered on. Do not try to remove them with a wrench. The only way to remove them is with a torch. You will also notice a device that is screwed on to the end of your hose bibbs. This device is a vacuum breaker. This is installed to prevent contamination of the potable water system from any source and must not be removed.

Your house may have a re-circulating hot water system. There are two types of re-circulating systems: Timer systems and On-demand systems.

Timer systems have a pump located in the garage. It is important that you use that timer, and set it for the most convenient setting for your household schedule. The recommended times are in the morning, typically a ½ hour before you need hot water, and in the late afternoon, typically around dinner time.

On-demand systems do not use a timer, they are activated by use. Hot water is circulated through the system, when and only when, you touch the button and “call” for hot water. These systems help reduce excessive waiting periods for hot water and energy costs.

If you do not have a re-circulating hot water system and you want one, it may be possible to install it. It all depends on your house layout, and the availability of electrical outlets.

IMPORTANT: If you have a hot water re-circulating system with the pump at the water heater, never turn off the main water valve to your house when the pump is running. It will burn out the pump and will not be covered by your warranty.

The Waste System

The waste system in your house is made with code approved materials and installed in an approved manner.

Waste piping is subject to expansion and contraction due to heat or cold. The waste system is strapped to the framing during construction to prohibit movement and maintain installation standards. During the use of the waste system a ticking noise may develop, this is due to the expansion and contraction of the material as a result of hot or cold water being drained in the system. This is not a defect or an emergency.

If your house has a sewer backwater valve, this valve is typically located in your garage slab or landscape area. The backwater valve is a code requirement and is a type of check valve that prevents mainline stoppages from entering back into the house. The valve requires little maintenance. To service the backwater valve, the lid must be removed and the flapper must also be removed. Never attempt to run a drain snake from the rear or side cleanout to the street without removing the flapper first. The snake will be able to pass through the backwater valve, but the flapper will not allow retrieval of the snake. The lid of the backwater valve twists off, and the flapper lifts straight up. If the code requires your backwater valve to be cast iron instead of ABS plastic, then you will need a socket wrench to remove the top.

It is recommended that you call a plumbing professional if servicing this valve is necessary.

The Gas System

The gas system in your house is made of code approved pipe and fittings. The gas meter is located on the utility side of the house or at a banked location on attached housing.

The plumbing contractor connects the gas connectors to the water heater and may connect the gas to your other gas appliances. Your clothes dryer, fireplace log lighter stub out and BBQ stub out all have threaded caps on them. Prior to removing the caps make sure the gas is turned off. It is very important to use two wrenches; one to hold the pipe and one to remove the cap. If you use only one wrench on the cap, you will most likely unscrew the pipe from the wall. Be sure to use pipe joint compound on the threads when connecting gas flex connectors or other pipes. The forced air unit is provided and installed by the heating/cooling contractor.

It is recommended that you call a plumbing professional before working on the gas system in your house.

There is an optional valve that can be installed at your gas meter outlet that is called an earthquake valve. This valve is activated by significant seismic activity. There is an advantage during an earthquake that does damage to a house in having the gas system off. Contact your plumbing professional for more information.

Lead Content

Most sources of drinking water, including those in California, contain some amount of lead. All drinking water sources are regulated under Federal Law. Brass plumbing fixtures, such as faucets, connectors and pipes can also contribute trace amounts of lead to the water.

Although the amount of lead contributed by brass faucets is minimal, we suggest that you take the following precaution: run the water for several seconds in order to clear the faucets and pipes of any standing water before use.

Due to the fact that there is some lead in all brass faucets, California law requires that consumers purchasing these products be provided with the following warning pursuant to the California Safe Drinking Water and Toxic Enforcement Act of 1986, also known as Proposition 65.

Warning: All brass faucets and other brass plumbing fixtures contain detectable amounts of lead, a chemical know to the State of California to cause birth defects or other reproductive harm.

THE SOLDER USED IN THE COPPER WATER PIPING SYSTEM OF YOUR HOME IS LEAD FREE.

Water Heater

If you will be away from home for an extended period (more than two days), turn your water heater to the pilot setting. If you do not have a pilot setting, turn water heater to lowest available setting. Failure to do this may result in pressure buildup, known as thermal expansion, and may cause leaks or damage to your water system, faucets, toilets, or washing machine hose.

The water heater is designed to provide hot water 24 hours a day/ 7 days a week with a minimum of maintenance. A yearly flushing of the water heater is recommended for optimal performance. Any rumbling noises heard from the heater are most likely from a build-up of minerals inside the tank. These minerals need to be flushed out.

Vent Noise
The concealed piping used to vent your water heater through the roof is a Type B gas vent pipe. This is installed per code and per manufacturers’ requirements. You may notice a ticking noise as your water heater goes through a heating cycle. This piping is double walled. The exterior wall is sheet metal and the interior wall is aluminum. The two different metals expand and contract at different rates and temperatures. When this expansion occurs it will cause a ticking noise. The architect determines the location of your water heater. There may be only one wall that will accommodate the venting of the water heater and unfortunately the vent may end up in a bedroom wall and cause some distraction.

The ticking noise you may here is due to the expansion and contraction of the venting material. There is nothing wrong with your water heater or the vent pipe. It will make noise. Your previous house may not have had the water heater located where the vent went through the bedroom wall or the old transit (asbestos) vent piping (which is no longer approved) could have been used.

Faucets & Toilets

The most common reason faucets or toilets run is dirt or other foreign particles getting into the faucet cartridges or valve assemblies. Products with moving parts have homeowner maintenance responsibilities, defective products will show up as a drip immediately. Dripping faucets and running toilets will be serviced for THE FIRST TWELVE WEEKS AFTER COE. Washers and faucet cartridges are very susceptible to sand, dirt or other foreign particles that may cause them to leak. Be especially careful if you or one of your subcontractors cut into your PVC water service line for landscape or other reasons. Whenever that line is cut into PVC burrs and dirt are introduced into your water system. This may reduce the flow of water through your pressure regulator, your faucets to leak, or your toilets to run due to the dirt in the moving parts. After the first twelve weeks, we must charge for the call as homeowner maintenance items.

Bathtubs & Showers

Do not stand on or lean hard against the tub spouts or use the tub spouts as grab bars. They are installed via a quick connect type fitting and is not designed to be used as a grab bar or push point. The spout may come loose and cause a non-warranty leak.
Your bathtubs will need to be re-caulked if you notice the grout cracking or falling out where the tub and tile meet, or around the plumbing fixtures. Failure to do so will result in a leak that is not covered by warranty. Re-caulking may be necessary after an earthquake, which shakes the grout loose from the tub in most instances.

Be cautious to not overfill your bathtub. The overflow plate, located a few inches below the top of your tub, is a safety drain and is not designed to handle all of the water that the faucet can put out or water displaced by your body in an overfilled tub.
Pressure balancing valves are required for showers and tub/shower combinations. These valves should be used at least once a month. The valve has moving parts called balancing spools that may corrode if they sit in water without moving for an extended period of time, and the valve may not work properly.

Water Conservation

The plumbing fixtures in your house comply with California’s mandatory water conservation regulations. Current toilets flush with 1.6 gallons of water, or less, as opposed older models that used 5-gallons per flush. Your showerheads have a 2.5 gallon per minute flow restrictor in them, this may be why you feel the volume of water is not as good as you might have expected. Your lavatory aerators also contain a flow restrictor.

Kitchen Faucets

Your kitchen may be equipped with a pull out spray type faucet. When using the pull out spray it is important not to spray water onto the hose port (where the hose emerges from the faucet or base plate). Any water that enters the hose port might be interpreted as a leak under the kitchen sink.

Disposals

Your garbage disposal is designed to grind up most food waste. We do not recommend placing the following items into the disposal: bones, coffee grounds, grease/fats, etc. Moderation is the key when using the disposal. To help avoid jams we recommend having the water running before placing any items in the disposal and only grinding up small amounts of waste at a time. In the event that the disposal becomes jammed you can use the wrench, which should be found in your move-in kit, to un-jam the disposal. Insert the wrench into the slot in the bottom of the disposal, and turn it in both directions. Whatever jammed the disposal should dislodge and may be carefully removed through the mouth of the disposal. Remember the disposal is not designed to be batch fed.

Periodically a 16 oz. cup of ice placed in the disposal and ground up, along with running water, will help keep the blades clean and keep the openings in the grinding surface free of debris.

Icemakers

Your home is equipped with a dedicated line to the icemaker box location. It is fed from a line underneath the kitchen sink. The icemaker box has a ¼ inch angle stop to supply water to the refrigerator. Underneath the kitchen sink there is a valve that controls the dedicated line to the icemaker box.

The reason for the piping and the valve under the kitchen sink is so you may have the water to the refrigerator connected to a water filtration system, such as a reverse osmosis system. These system upgrades may be installed at any time. Our design also allows you to change filters for the refrigerator without pulling the refrigerator away from the wall and possibly damaging the flooring. If you choose not to add an after-market water filter/reverse osmosis unit, it is important to be sure the valve is in the open position; otherwise the water to the recessed box will be turned off.

Washing Machine

Use only new water supply hoses when connecting clothes washer, be sure to secure the drain hose so it will not dislodge from the drain hole. Professional installation is recommended.

Condensate Drains for Air Conditioners

The drain(s) go from your forced air unit to the nearest drain outlet or to the exterior of the house. Forced air units located in the attic will have two drains, one primary and one secondary. The primary drain is connected to a plumbing fixture or drained to the exterior of the house. The secondary drain discharges over an exterior door or window and is a safety drain. If you notice water coming from the secondary drain, it means the primary drain is clogged and service is required.

The heating contractor connects the drain line at the forced air unit. Before pouring outside walks or patios, check to see if there are any pipes sticking out, as it may a drain. Do not cover it or you will have an overflow at your forced air unit. If in doubt call your plumbing professional for assistance.

Balcony Drains

Some balconies are designed so that a drain is not needed. If you balcony has a drain, it may require maintenance. We recommend that you pour water down the drain to ensure that it is flowing freely. They may become clogged with debris or leaves – which is not covered under warranty. These drains do not go into the sewer system; they discharge into landscape areas.

Drainage or Waste Line Stoppages

Drainage or waste line stoppages (such as toilets, sinks, tubs, showers, disposals, etc.) will be covered for TWELVE WEEKS after COE. This allows ample time for a stoppage caused by construction debris to occur. There is a charge for us to clear stoppages after this twelve week period.
Stoppages are usually a result of what is put down a drain. Too much paper (tissue, toilet paper, feminine products, baby wipes, etc.) or other foreign material (toys, q-tips, etc.) being flushed the down toilets are causes of stoppages. If you notice a slow drain, do not flush the toilet as this may cause the toilet to overflow. Please call for service or assistance if this occurs. See the waste system section for more information.

Product Defects

Any suspected defective product will be subject to the manufacturer’s inspection and conditions of replacement per the manufacturer’s warranty. Please notify your plumber immediately if you feel you have a defective product.

Fixtures and Finishes

The types, finishes & features of the fixtures installed in your house were selected by the builder. Plumbing Concepts, Inc. has installed only new and first quality products.

We ask that you inspect each faucet, sink, lavatory, tub, shower, toilet, toilet seat, etc. closely WITHIN THE FIRST TWO WEEKS OF YOUR OCCUPANCY for possible visual flaws. Occasionally a product may have a factory blemish or unseen defect. Damaged or defective items must be called in to our Customer Service Department within the first FOUR WEEKS. After that period, damaged or scratched items will be available for replacement through Plumbing Concepts, Inc. at a reasonable charge for material and labor.

Cleaning Products

The manufactures recommend that nothing stronger than soap and water be used on faucets. Abrasives should never be used on tubs, sinks, and lavatories. Remember that the more abrasive the cleaner, the shorter time the gloss on the fixture will last.

Bowl cleaners that are placed in the toilet tanks will cause the flappers and washers to break down, warp or fall apart. If chemicals have been added to the toilet tank, it will void the warranty on these parts and a charge to repair or replace will result. Toilet bowl cleaners that are introduced directly into the bowl will not harm the toilet.

EMERGENCY SERVICE available 24 hours a day / 7 days a week
FREE In Home Estimates
FACTORY TRAINED TECHNICIANS

Electronic Leak Detection & Camera Inspection of Sewer Lines & Drain Services

~ Plumbing Concepts utilizes electronic leak detection to isolate leaking pipes without causing unnecessary damage to drywall and flooring.
~ Color sewer cameras are used for inspection of all sewer lines. All inspections are videotaped.

Water Heater Maintenance & Annual Servicing: Conventional Tanked & Tankless Units

~ Plumbing Concepts is proud to have factory trained technicians that can help keep your water heater running great for years to come. We can flush the water heaters to prevent corrosion on the tanked units & we can replace flex lines before the leak and cause damage.
~ We also offer yearling flushing of tankless units to remove hard water build-up that can accumulate inside the lines and keep the water heater from functioning properly.

Remodels & Re-piping

~ Getting ready to remodel your kitchen or bathroom? Or is the plumbing in your house ready to be replaced? Plumbing Concepts can help. Whether it is remodeling your kitchen to give you the kitchen of your dreams or replacing the old plumbing system in your house – we are here to help you get it done right.

Faucet & Fixture Replacements and Upgrades

~ Do you have worn out faucets & fixtures? Or do you just want to update the look of your kitchen and bathrooms? We can help. We have the latest styles and trends from top manufacturers available for you to choose from.

Hot Water Re-circulating Systems: Timer and On Demand Systems

~ Tired of waiting for hot water in the shower? Plumbing Concepts can help solve that problem by installing a hot water re-circulating system in your home. We have several systems that can help solve your hot water needs.

Water Treatment and Instant Hot Water Dispensers

~ Have you ever wanted near boiling water at your fingertips? Now you can. Plumbing Concepts can install an Instant Hot water dispenser at your kitchen sink, giving you hot water whenever you want it. It is perfect for baby bottles, that quick cup of tea and so much more.
~ Interested in clean, safe water for your entire home? Plumbing Concepts has a variety of water treatment products to help. Let us help select the best products to meet your needs.

Contact Us

    A COMPANY YOU CAN TRUSTs

    Contractors License #469996

    Disclaimer: The information provided on this blog is curated using online data and sources. We encourage readers to check for accuracy and always consult with a licensed professional before making any decisions. For the latest information and expert plumbing services, please call our office at (951) 520-8590.

    Plumbing Concepts, Inc. © 2023. All rights reserved.

    Plumbing Concepts, Inc. © 2023. All rights reserved.

    We continue our promise to be in operation for you during these trying times. Our hygiene and safety. Protocols remain in place to help protect you and our employees. Read for more information…